Chasers Motorworks - Performance Parts and Upgrades, General Service and Repair, Dyno Tuning, Engine Building, Custom Fabrication, Turbocharging, Engine Conversions, Japanese Import Specialists Chasers Motorworks - Location
MainService/PartsFeatured CarsMotorsportTuningProfile
 

Nismo

Apexi

Blitz

Cusco

Motec

Greddy

Tomei

Sard Fuel Injection

Exedy

Counter

SR20 Lighened Billett Flywheel

Made from high carbon billet steel, a bolt on replacement for the stock flywheel for any SR20 engine. Will noticibly increase response on/off throttle, and increase engine braking under decelleration.

$500 buy direct, $800 supply and fit.

KTS SC Fully Adjustable Coilovers S13/S14/S15

KTS SC Damper System coilovers available for S13 and S14/S15. Fully height and 16-way damper adjustable, pillow-ball mounts and extra thick mounting plates, threaded shock body, plus more. Supplied springs are rated at 8kg/mm front and 6kg/mm rear.

$1800 buy direct, $2000 supply and fit.

KTS Adjustable Castor Rods S13/R32/R33/R34

Made from high quality billett alloy, these KTS adjustable castor rods will allow adjustment of castor -/+6 to 8 degrees from stock, allowing the user to fine tune front tyre load and increase handling characteristics. Available for S13/R32 and R33/R34.

$250 buy direct, $300 supply and fit.

KTS Adjustable Rear Arm Set

KTS adjustable rear camber, toe, traction arm kits for S13/R32 and S14/S15/R33. With the use of this arm set, full control over the rear tyre angles can be obtained, allowing the user to fine tune handling characteristics. Made in Japan from the highest quality aircraft grade materials and powdercoated a metallic blue for aesthetic appeal.

$700 buy direct, $850 supply and fit.

S13/S14/S15 Intercooler Kit

Trust design intercooler kit for any S13/S14/S15. Complete bolt-on kit, includes everything needed for installation - intercooler, polished alloy piping, brackets, hoses/silicon, clamps, etc.

$900 buy direct, $1150 supply and fit.

S13/S14/S15 SR20DET Turbo Upgrade (~400hp)

Upgrade your SR20DET powered Nissan with the famous Garrett 'disco potato' GT28RS. This turbo will produce upto 400hp, which means over 220kw at the wheels. Included in the kit is a 2.8mm stainless steel low mount manifold, a high flow stainless steel dump pipe, 1-bar Garrett actuator and all the lines/gaskets needed for fitting. Choice of .64 and .84 exhaust housings.

$2400 buy direct, $2700 supply and fit.

+ 3" stainless steel front pipe $250
+ Nippon Denso 600hp fuel pump $360
+ Apexi Power FC inc. Commander $1200
+ Nismo 550cc injectors $180 each

R32/R33 GTST Skyline Turbo Upgrade (~450hp)

Upgrade your tired or worn out stock T3 ceramic-wheel turbo to a 450hp rated steel-wheel ball bearing replacement. Using the original compressor cover and exhaust housing from your stock turbo, the upgrade utilises a genuine Garrett GT25 ball-bearing cartridge, and bigger steel compressor/turbine wheels. The kit comes complete with lines and fittings, so everything is included for a true bolt on replacement.

$2200 to buy direct, or $2400 supply and fit.

R32/R33/R34 GTR Skyline Turbo Upgrade (~550hp)

Off the shelf Garrett GT2560R ball-bearing turbos that can easily produce 300kw+ at the treads on relatively low boost. Comparible to HKS GT2530 turbo's - an awesome combination on the RB26DETT - these turbo's are designed to create maximum power without sacrifycing response. Turbo's are supplied as bolt on replacements, with Garrett 1-bar actuators. No modifications are necessary to use these turbos.

$2500 pair to buy direct , or $3200 supply and fit.